If you want surround sound all the time if so follow these simple steps if you do not want surround sound all the time you can Read Our post on how to set up a home theater system using the TV as the main control, this Post will show you how to set up a home theater system we are using the receiver as the brain of our system and will also hook up a blu-ray disc player and a Playstation 3 to our receiver while running all of these to a sony TV we will also cover speaker placement and setup as well as some steps to ensure that you are getting sound from each speaker before we get started.
Read Home theater Review Here best home theater system under 15000.
You'll need a receiver a TV speakers speaker wires a pen some paper and either HDMI digital optical audio cable composite or component cables for each of the products you are going to be setting up in your home theater we are going to start by hooking up our components since we are using the receiver as the brain of the system we will always have the receiver turned on when watching TV blu-ray movies or playing PlayStation blu-ray players and PlayStation will each need an HDMI cable the TV will actually have two cables one HDMI to send the picture from the receiver to the TV and a digital optical cable to send the sound from the TV to the receiver so,
Let's get started with our hookup make sure that all of your products are turned off next plug the blu-ray disc player into the receiver on the back of the blu-ray disc player connect one end of the HDMI cable to the output and the other end of the HDMI cable to the input on the receiver we are going to use the bd/dvd input now we are going to take the signal out of the PlayStation and into the receiver we're going to use game as the input as you plug.
Your products in you should make a note of where you are plugging them into you will need this information later now let's connect the TV first take an HDMI cable and connect one end of the HDMI cable out of the receiver while connecting the other end to the TV HDMI input you will also need that digital audio optical cable now use this cable to connect the TV to the receiver take one end of the digital optical audio cable and connect it to the TV's output connect the other end to the receivers input now that all of our components are connected let's hook up the speaker each speaker has a red and a black side make sure when you are connecting the speakers that you match up the wires to the proper side.
Check here detailed Reviews about best 5.1 speakers India.
If you have spring clips press the clip down insert the wire into their corresponding slot for example if the gray wire with the black stripe is connected to the black on the back of the speaker then make sure to connect the other end of that wire to the black on the back of the receiver power on your components turn the input selection dial on the receiver to one of the inputs you have connected if the receiver is on and the TV is receiving a signal you should see the TV screen change and indicate which input the receiver is on if you do not see the screen change after a few seconds check your connections and try again next we need to test the speakers so we will go into the speaker testing menu press the up or down arrow buttons until speaker is selected and then press the center button use the up or down arrow buttons to highlight SP pattern press.
The center button here you will need to tell the receiver which way you have set up your speakers press the up or down arrow buttons until you see an image that is similar to your speaker configuration once you have selected your configuration press the center button now back in the speaker setting menu press the up or down arrow buttons until you highlight test tones and press the center button press the up arrow button to activate test tones as the test cycle stir the speaker's.
Buying Home theater Is not easy Job Any More There go for detialed review about best 5.1 multimedia speakers in india.
You should hear sound coming from the speaker that is highlighted on the screen if no sound is heard check your speaker connection and your volume and try the test again do not turn your volume up high during the test as sudden high noise may damage your speakers and ensure that it is not on mute a moderate volume is sufficient by pressing the up and down arrow buttons in this menu you can choose the test speakers individually which is helpful if you are not receiving sound and need to adjust that speakers connection once you are able to hear sound from all of your speakers press the menu button to go back to the main menu and then press the menu button to exit now we will test the devices for the Sony blu-ray disc player press the input button you wrote down earlier on the receiver remote you should now see the blu-ray disc player menu on the TV screen if you do not see a picture check your connection and make sure that your TV.
More Resources
